Networking & Cabling

TRUSTED CABLING SERVICES YOU CAN RELY ON

Large cabling projects can take a while to complete, but with PCTECH Computer Systems, our structured cabling installation team will work around the clock to ensure that your project is completed in a timely manner. From fiber optic cables to high-speed data systems, our team of network cabling professionals is dedicated to providing the very best products and customer service for our clients.

Planning for Network Cabling?
PCTECH Computer Systems will help your business to Plan, Design, Install suitable cabling for your network.

Network Devices
We also provide many selections of Network Equipment for your companies with installation and configuration.
 
Types Of Network Devices We Provide.
 
Hub
A hub is basically a multi port repeater. A hub connects multiple wires coming from different branches, for example, the connector in star topology which connects different stations. Hubs cannot filter data, so data packets are sent to all connected devices.  In other words, the collision domain of all hosts connected through Hub remains one.  Also, they do not have the intelligence to find out the best path for data packets which leads to inefficiencies and wastage.
Switch
A switch is a multi port bridge with a buffer and a design that can boost its efficiency(a large number of ports imply less traffic) and performance. A switch is a data link layer device. The switch can perform error checking before forwarding data, which makes it very efficient as it does not forward packets that have errors and forward good packets selectively to the correct port only.  In other words, the switch divides the collision domain of hosts, but broadcast domain remains the same.
Router
A router is a device like a switch that routes data packets based on their IP addresses. The router is mainly a Network Layer device. Routers normally connect LANs and WANs together and have a dynamically updating routing table based on which they make decisions on routing the data packets. Router divide broadcast domains of hosts connected through it.
 
Modem
A device that converts signals produced by one type of device (such as a computer) to a form compatible with another (such as a telephone) and that is used especially to transmit and receive information between computers via landlines
Access Point
An access point is a device that creates a wireless local area network, or WLAN, usually in an office or large building. An access point connects to a wired router, switch, or hub via an Ethernet cable, and projects a WiFi signal to a designated area. For example, if you want to enable WiFi access in your company's reception area but don’t have a router within range, you can install an access point near the front desk and run an Ethernet cable through the ceiling back to the server room.
Repeater
A repeater operates at the physical layer. Its job is to regenerate the signal over the same network before the signal becomes too weak or corrupted so as to extend the length to which the signal can be transmitted over the same network. An important point to be noted about repeaters is that they do not amplify the signal. When the signal becomes weak, they copy the signal bit by bit and regenerate it at the original strength. It is a 2 port device.



Get In Touch

46, Jalan Perai Jaya 3, Bandar Perai Jaya, 13700 Seberang Perai, Penang, Malaysia.

+604-390 1117

sales@pctech.com.my

Switch to Mobile Version